Bricks are manufactured by grinding or crushing the clay in mills and
mixing it with water to make it plastic. This paper presents a parametric
experimental study, by utilization of glass powder, GGBS, Perlite ore in fly
ash brick manufacturing. Glass powder, Perlite ore is taken as constant of 2%,
10% and GGBS is replaced with 10%, 20% and 30% for each proportion that have
been calculated. The physical and mechanical properties of fly ash brick are
investigated. These bricks were tested for compressive strength, water
absorption, efflorescence, Density and soundness test after 21 days curing as
per Indian Standards. Based on the results obtained from these experiments, the
suitability use of fly ash bricks is ascertained. - See more at
No comments:
Post a Comment